View Cart 0

Lectrosonics SRc Dual-Channel Slot-Mount ENG Receiver

src-1-20160830-1438918072.jpg

Details

The SRc Dual-Channel Slot-Mount ENG Receiver fromLectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video-camera-receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.

Pricing

Purchase for $2,419.00
Purchase for $2,419.00
  • For Camera Slots and Various Adapters
  • Dual-Receiver Design for Two Channels
  • Tracking Front-End Filters
  • Tunes Over a 75 MHz Range
Product Info
Manufacturer Part #SRC
BrandLectrosonics
Frequency Selection Steps Selectable; 100 or 25 kHz
Type of Receiver Dual conversion, superheterodyne
IF Frequency Ch.1: 248.450 MHz and 350.000 kHz
Ch.2: 243.950 MHz and 250.000 kHz
Frequency Stability ±0.001 %
Front End Bandwidth 20 MHz @ -3 dB
Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm), A weighted
60 dB Quieting: 2.2 uV (-100 dBm), A weighted
Squelch Quieting Greater than 100 dB typical
AM Rejection Greater than 60 dB, 4 uV to 1 V
Modulation Acceptance 85 kHz
Image and Spurious Rejection 85 dB
Third Order Intercept 0 dBm
Diversity Method SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel
FM Detector Digital Pulse Counting Detector operating at 250 and 350 kHz
RF Spectrum Analyzer Coarse and fine scanning modes for RF spectrum site survey
Antenna Inputs 50 Ohms SMA female connectors
Audio Output Connectors Interchangeable D connector adapters for camera slot interfaces
Dual TA3 male (mini XLR) balanced output adapter
Balanced output adapter with fixed cables
Front-panel TA5M with two balanced outputs (5P version)
Audio Output Level Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower
Audio Channel Crosstalk -80 dB or better
Front Panel Controls and Indicators Sealed panel with membrane switches
LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level
Audio Test Tone 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD
Transmitter Battery Type Selection 9 V alkaline, 9 V lithium, AA alkaline, AA lithium, NiMH
Phase Invert Audio-output phase normal or inverted
Compatibility Modes HYB native Digital Hybrid mode
M.3 non-Lectrosonics (call factory)
200 Lectrosonics 200 Series
100 Lectrosonics 100 Series
HYB/TB Digital Hybrid w/ Talkback
M.7 non-Lectrosonics (call factory)
M.6 non-Lectrosonics (call factory)
IFB Lectrosonics IFB
SmartNR (Noise Reduction) Off, Norman, Full modes (available in Digital Hybrid mode only)
Audio Performance (Overall System)
Frequency Response 32 Hz to 20 kHz (+/- 1 dB)
THD 0.15% (system) typical in Digital Hybrid mode
Input Dynamic Range 125 dB (with full Tx limiting)
Rear Panel Controls Audio-output connectors
External DC input
Powering and Current Consumption Min. 7 V to max. 18 VDC; 2.2 W
125 mA at 18 VDC
180 mA at 12 VDC
295 mA at 7 VDC
Runtime with SRBATTSLED Adapter 7.2 V, 2200 mAh "L" style battery will typically provide about 11 hours of operation
Transmitter Battery Level Tracking: LCD display with battery icon or timer readout
Operating Temperature -4 to 122°F / -20 to +50°C
Dimensions (W x H x D) 2.92 x 1.22 x 4.93" / 74 x 31 x 125 mm
Weight 7.9 oz / 225 g with SREXT adapter

Average Customer Rating

There are no ratings for this product, be the first to review!

Customer Reviews

This product has no reviews yet.

Back to Products