Providing a complete single-axis lens control system packed in a hard case, the Single Axis Wireless Follow Focus Express Plus Standard Kit from CINEGEARS allows you to set up a wireless lens control motor and controller system on your camera system equipped with geared lens and either 15mm or 19mm support rods. The lens controller allows you to adjust the end points to program focus stops, in addition to the two adjustable hard stops on the handwheel. The kit includes two 2" rod clamps with mounting brackets, one each 15mm and 19mm rod clamps, allowing you to mount the included lens control motor on either size rod. The third clamp is approximately 3" long and mounts to a 19mm rod, or a 15mm rod using the included adapter bushing.
In addition to the replaceable cinema-style drive gear that comes with the lens control motor, the kit includes four different replacement gears with gear MODs of 0.5, 0.6, 0.8, and 1.0, in case you have to drive lenses with non-cine-style gearing or plastic lens gears. The included gear re-locator allows you to use lenses that focus in the opposite direction from standard, without having to alter your focus-pulling technique for those lenses. The kit fits into a waterproof case with foam inserts to protect your equipment during transport and storage.
The CINEGEARS Single Axis Wireless Express Plus Controller is a wireless follow focus controller that easily pairs with a CINEGEARS wireless motor. You can use the controller for focus, zoom, or iris. The controller operates on a frequency of 433 MHz, providing a range of up to 320' line of sight. The wireless controller and optional motor combination provide simple auto lens calibration and manual lens remapping for easy lens changes.
The Express Plus Controller features a removable marking disc, a side mounted index marker with an illuminating LED for pulling focus in dim lighting conditions, and allows you to program up to four stop / positions. Adjustable physical hard stops on the controller are useful when working with lenses that do not have physical hard stops. You can adjust the transition speed for programmed presets, and with optional cables connected to your motor, you can control start/ stop for ARRI, RED, Sony, and Canon professional camcorders. LED indicator lights show you the status of the controller.
The CINEGEARS 2" Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens's geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.
The CINEGEARS 2" Rod Bracket for Lens Control Motors mounts on a 19mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens's geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.
The CINEGEARS 3.1" Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens's geared focus, zoom, or iris ring. It features two spring-loaded locking levers; one that allows you to tighten the bracket on the rod, and a second locking lever that secures the motor to the clamp.
The CINEGEARS Magnetic Beveled Marking Disc for Express Controller is specifically made to work with a CINEGEARS Express controller, and only the Express controller. It magnetically mounts on the controller and incorporates a slot for a corresponding index pin, which prevents the marking disk from spinning on the controller, ensuring your marks stay accurate. The disk is made to be used with either dry or wet erase marker for easy cleaning and re-marking.
The CINEGEARS 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motorsfeatures 4 lightweight plastic gears that allow you to drive most geared cine or ENG-style lenses. The gears can replace the original aluminum drive gears for CINEGEARS lens motors, providing a cost effective solution to handle surprises in the field.
Each gear is only 38mm in diameter, and features a captive mounting screw. The smaller diameter of the replacement gear, as compared to the standard drive gears, may provide smoother movement as you drive the lens with your motor. Each gear is labeled allowing you to easily select the right gear for your lens. The gear marked 0.8 is for cine-style lenses. Gears marked 0.5 and 0.6 are standard for ENG-style lenses.
The CINEGEARS Motor Gear Re-Locator consists of a chrome plated stainless steel spacer that allows you to position your drive gears about 0.5" from the normal gear location when using your CINEGEARS motors. The spacer is made of the same material, chrome-plated stainless steel, as the inside of the CINEGEARS metal gear to prevent gear stripping. Included with the gear spacer is an attachment screw, which is needed to attach your drive gear to your motor with the spacer in place.
The CINEGEARS Single Axis Wireless Motor Power Cable provides power to your motor from an optional power source outfitted with a D-tap connector. The cable features a D-tap connector on one end and a 2-pin LEMO connector on the other. The cable features plastic insulation, and it can handle from 12 to 28 VDC.
The CINEGEARS Hard Case with Foam Inserts for Single-Axis Kit is a waterproof case that provides protection to your equipment from damage from falls and impact. The custom cut foam interior allows you to keep the components of your single axis wireless kit snug and secure during transport and storage.
|Manufacturer Part #||1-103|
Login to review this product.
This product has no reviews yet.