The Teradek Bolt 500 SDI/HDMI Video Transceiver Set includes one transmitter and one receiver. With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek has have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (one Transmitter can multicast up to four Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.
SDI and HDMI Input and Output - The Teradek Bolt 500 supports cross conversion. You can input a signal from an SDI or HDMI source and output from either one on the other end.
1080/60p Wireless Monitoring - Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Teradek states that line-of-sight transmission is up to 500 feet without break-up or image degradation, and up to 100 feet without line-of-sight with less than 1ms latency. If you lose the signal, the Bolt 500 will instantaneously reconnect once you move back into range.
Multiple Receiver Streaming Capabilities - This kit includes one transmitter and one receiver; however, the Bolt 500 transmitter lets you send video to four Bolt 500 or Sidekick receivers simultaneously.
Two New DFS Channels - Two newly introduced DFS channels make it easier for you to operate without interference.
Features:
| Manufacturer Part # | 10-0935-1 |
|---|---|
| Rental Includes | Bolt 500 3G-SDI/HDMI Video Transmitter & Receiver with mounting blocks, 2-18" 2-Pin LEMO to PowerTap Cable, 1-6' 2-Pin LEMO to 18W AC Adapter, 2-15" Coiled SDI (BNC-to-BNC) Cable, 1-Light Stand Adapter w/ 1/4-20 threads, 1-1/4"-20 Hot Shoe Adapter, 1-1.25" Long 1/4"-20 Thumb Screw, 2-1/4-20 Allen Screws with 3/16" Allen Wrench, Quick Start Guide & Protective Case. HDMI cables available at n/c if needed. |
| Video Inputs | 1 x 75 Ohms BNC 1 x HDMI female Type A |
| Video Outputs | 1 x 75 Ohms BNC (loop-out) |
| Input / Output | 3G-SDI/HDMI |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
| Latency | <0.001 seconds |
| Delay | <0.001 sec (when no video format conversion is enabled) |
| Supported Resolutions | 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 1080p sf23.98 / 24 / 25 / 29.97 / 30 1080i 50 / 59.94 / 60 720p 50 / 59.94 / 60 480p 59.94 / 576p 50 (via HDMI ports only) 480i (NTSC) / 576i (PAL) |
| Video Compression | Visually lossless |
| Color Correction | CDL/1024 1D LUT (supports 10-bit color) 33 x 33 x 33 3D LUT (supports 10-bit color) |
| Frequency | Non-DFS Frequencies: 5.19 to 5.23 GHz 5.755 to 5.795 GHz DFS Frequencies: 5.27 to 5.55 GHz 5.67 GHz |
| Channel Selection | Auto |
| RF Power | 17 dBm EIRP |
| Range | Up to 500' (152 m) |
| Encryption | AES-128 |
| Audio Compression | 48 kHz 24-bit PCM |
| Audio Input | Embedded |
| Switches | On/Off Reset Switch |
| Application | Bolt Manager Application for OSX & Windows |
| Noise Rejection | Can coexist with Wi-Fi and 5 GHz cordless phones |
| Construction | Milled aluminum (chassis) and regulation-compliant PCB Plastic cap |
| Power Input Connector | 2-pin 7 to 28 VDC |
| Power Consumption | 7.3 W nominal @ 1080p |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Dimensions | TX - 0.95 x 2.6 x 4.0" RX - 0.95 x 3.5 x 5.8 " |
| Weight | TX - 7.7 oz RX - 10.5 oz |
Login to review this product.
This product has no reviews yet.
