Add a second wireless receiver to any Bolt 500 system. The output is either HDSDI or HDMI.
With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek has have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (one Transmitter can multicast up to four Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.
SDI and HDMI Input and Output - The Teradek Bolt 500 supports cross conversion. You can input a signal from an SDI or HDMI source and output from either one on the other end.
1080/60p Wireless Monitoring - Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Teradek states that line-of-sight transmission is up to 500 feet without break-up or image degradation, and up to 100 feet without line-of-sight with less than 1ms latency. If you lose the signal, the Bolt 500 will instantaneously reconnect once you move back into range.
Multiple Receiver Streaming Capabilities - This kit includes one transmitter and one receiver; however, the Bolt 500 transmitter lets you send video to four Bolt 500 or Sidekick receivers simultaneously.
Two New DFS Channels - Two newly introduced DFS channels make it easier for you to operate without interference.
|Manufacturer Part #||10-0937|
Bolt 500 3G-SDI/HDMI Video Receiver with mounting block, 1-18" 2-Pin LEMO to PowerTap Cable, 1-6' 2-Pin LEMO to 18W AC Adapter, 1-15" Coiled SDI (BNC-to-BNC) Cable, 1-1.25" Long 1/4"-20 Thumb Screw & 2-1/4-20 Allen Screws with 3/16" Allen Wrench.
HDMI Cables available at n/c if needed.
|Color Sampling||SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
|Delay||<0.001 sec (when no video format conversion is enabled)|
|Supported Resolutions||1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
1080p sf23.98 / 24 / 25 / 29.97 / 30
1080i 50 / 59.94 / 60
720p 50 / 59.94 / 60
480p 59.94 / 576p 50 (via HDMI ports only)
480i (NTSC) / 576i (PAL)
|Video Compression||Visually lossless|
|Color Correction||CDL/1024 1D LUT (supports 10-bit color)
33 x 33 x 33 3D LUT (supports 10-bit color)
5.19 to 5.23 GHz
5.755 to 5.795 GHz
5.27 to 5.55 GHz
|RF Power||17 dBm EIRP|
|Range||Up to 500' (152 m)|
|Audio Compression||48 kHz 24-bit PCM|
|Application||Bolt Manager Application for OSX & Windows|
|Noise Rejection||Can coexist with Wi-Fi and 5 GHz cordless phones|
|Construction||Milled aluminum (chassis) and regulation-compliant PCB
|Power Input Connector||2-pin 7 to 28 VDC|
|Power Consumption||7.3 W nominal @ 1080p|
|Operating Temperature||32 to 104°F (0 to 40°C)|
|Dimensions||0.95 x 3.5 x 5.8"|
Login to review this product.
This product has no reviews yet.