Add a second wireless receiver to any Bolt 1000 system. The output is either HDSDI or HDMI.
With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek has have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (one Transmitter can multicast up to four Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.
SDI and HDMI Input and Output - The Teradek Bolt 1000 XT supports cross conversion. You can input a signal from an SDI or HDMI source and output from either one on the other end.
1080/60p Wireless Monitoring - Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Teradek states that line-of-sight transmission is up to 1000 feet without break-up or image degradation. If you lose the signal, the Bolt 500 will instantaneously reconnect once you move back into range.
Multiple Receiver Streaming Capabilities - The Bolt 1000 transmitter lets you send video to four Bolt 1000 or Sidekick receivers simultaneously. Compatible with 3rd generation Bolt 1000, Sidekick II, Bolt 1000 LT, and the 703 Bolt monitor.
|Manufacturer Part #||10-1967-V|
Bolt 1000 XT 3G-SDI/HDMI Video Receiver with dual V-mount plates, 1-18" 2-Pin LEMO to PowerTap Cable, 1-6' 2-Pin LEMO to 18W AC Adapter, 1-15" Coiled SDI (BNC-to-BNC) Cable, 1-1.25" Long 1/4"-20 Thumb Screw & 2-1/4-20 Allen Screws with 3/16" Allen Wrench.
HDMI Cables available at n/c if needed.
|Construction||Milled aluminum (chassis) and regulation-compliant PCB|
|Video Outputs||SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI type A receptacle
USB: 1 x USB-type 3.0 Micro B receptacle
|SDI Ancillary Data Support||Supports metadata, timecode, and start/stop flags from select camera manufacturers.|
|Color Sampling||SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
|Latency||<0.001 seconds (Tx to Rx without format conversion)|
|Supported Resolutions||1080p: 60/59.94/50/30/29.97/25/24/23.98
576P: 50 (via HDMI only)
480p: 59.94 (via HDMI only)
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
|Audio Compression||48 kHz, 24-bit PCM|
|Interfaces||Switches: On/Off and Reset
Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows
USB Interface Functionality: Upgrade via mini-USB
|RF Power||15 dBm EIRP|
|Range||Up to 500' / 152.4 m line of sight|
|Unicast Multicast||Unicast / Multicast|
|Noise Rejection||Can coexist with WiFi and 5 GHz cordless phones|
|Power Input||2-pin connector
7 to 28 VDC
|Power Consumption||Nominal 9 W (measured at 1080p60)|
|Operating Temperature||32 to 104°F|
|Mountable||1 x 1/4"-20 threaded mounting hole
2 x M3 threaded mounting holes
|Dimensions||3.5 x 5.4 x 0.95"|
Login to review this product.
This product has no reviews yet.