The DSR 2000 is Sony’s top of the line DVCAM editing recorder. It has a full range of digital interfaces such as SDI, i.LINK, SDTI (QSDI), AES/EBU and also analog Component I/O. It is designed to playback DVCAM tapes, DV tapes recorded in both SP/LP modes, and even DVCPRO tapes (*DVCPRO tapes are not compatible with SDTI and i.LINK).
DVCAM Master Series Digital Videocassette Editing Recorder has industry-leading performance features such as pre-read editing, a built-in Jog/Shuttle dial that allows two-machine editing and DMC (Dynamic Motion Control) for noiseless slow-motion playback.
To provide highly stable video signals, the DSR-2000 is equipped with process control for both analog and digital outputs. This provides accurate control of video level, chroma level, chroma phase (hue), set up, Y/C delay, Sync phase and SC (Sub Carrier) phase for composite, component, S-Video and SDI outputs.
DSR-2000 VTR, power cable, manual & case.
|Tape Speed||28.193 mm/sec.|
|Maximum Recording Time||184 min|
|Audio Signal Format||16 bit / 48kHz|
|Frequency Response||20Hz to 20kHz|
|Input and Output Connectors||SDI Video- BNC (x 2 input, 3 output)
SDTI- BNC (x 1 input, 1 output)
Fire Wire- 6-Pin (x 1)
S-Video- 4-Pin (x 1 input, 1 output)
Composite Video- BNC (x 2 input, 3 output)
Reference Video- BNC (x 2 input, 1 output)
Timecode- BNC (x 1 input, 1 output)
Analog Audio- XLR (x 4 input, 4 output)
AES/EBU Audio- BNC (x 2 input, 2 output)
Monitor Audio- 1/4-Inch Phono (x 1 output)
RS-422- 9-Pin (x 1)
RS-232C- 9-Pin (x 1)
Remote Control Panel- 15-Pin (x 1)
Video Control- 15-Pin (x 1)
Headphone- 1/4-Inch Phono (x 1)
|Power Requirements||100-240 VAC, 50/60 Hz|
|Operating Temperature||41° to 104° F|
|Dimensions (WxHxD)||16.875 x 7.0 x 19.625"|
Login to review this product.
This product has no reviews yet.