View Cart 0

I-Beam Rigging Clamp - 1 Ton 8" Jaw



Beam Clamps are designed to be used as a temporary or permanent fixed position lifting point for overhead rigging without drilling or welding. Beam Clamps are designed also to reduce the I-beam flange stress by distributing loads away from the flange edges during overhead lifting applications.

Using beam clamps safely

  • Ensure that the beam clamp is of correct capacity for the load being lifted and that the beam will not be damaged by localized overloading.
  • Ensure that the clamp is fitted correctly over the center of gravity of the item being lifted and will not be subjected to side loading.
  • Before lifting a load, ensure that the clamp has been tightened and that the lifting appliance is fitted correctly into the eye of the clamp.

In-service inspection and maintenance

  • Ensure that beam clamps are kept clean and moving parts are lubricated.
  • Regularly inspect beam clamps for wear, damage, distortion, cracks, and any defects likely to cause danger.
  • If any of the above defects are found, remove the beam clamp from service and refer to a competent professional.


Rent for $5.00/day
Rent for $5.00 per day


  • Fits flange width range of 3-9 inches
  • Permanent or temporary mounting
  • Load bar diameter = 1 inch
  • 2000 lb capacity
Product Info
Rental Includes

1 - I-Beam rigging clamp

Average Customer Rating

There are no ratings for this product, be the first to review!

Customer Reviews

This product has no reviews yet.

Product Documentation

Back to Products