View Cart 0

800w HMI PAR - Joker/Bug Kit

  • jb800-3.jpg


Because of the increasing use of Chimera® Lightbanks for fine daylight interiors, two camera interviews, TV magazines, and documentaries, the Joker Bug 800 was designed to take full advantage of the large reflective material inside a Lightbank. The Joker Bug 800 fits in one tiny airline case, weighing only 38lbs. The next wattage up (1200) is twice the size and weight. The actual size of the kit is exactly the same as a Joker Bug 400 Kit. When working in practical locations such as homes, offices or business, power consumption is a key factor. The Joker Bug 800 will produce as much output as a 4,000 Watt quartz fixture with the power draw of only 11 Amps, minimizing the risk of overloading a circuit. The next size up (1200) monopolizes an entire circuit whereas the Joker Bug 800 will allow for another source such as a Joker Bug 400 on the same circuit!

The Joker Bug 800 puts out 50% more light than a 1200 in a Chimera®, it is smaller than its nearest lower wattage (575). And fits in the same case as a Joker Bug 400. The Joker Bug 800 only draws 11 Amps allowing for a 400W to be used on the same circuit.

K5600 Product Web Page


Rent for $160.00/day
Rent for $160.00 per day
Product Info
Rental Includes

Fixture with 800w Lamp, Barndoor, Set of 3 Scrims & Set of 4 Lenses in Lens Bag, 1-Clear Beaker, 1-Frosted Beaker, Spare Lamp, 1-25' Lamphead to Ballast Cable, 800w Electronic Ballast & ATA Kit Case.

  • LAMP HOUSING: Aluminum casting
  • SAFETY GLASS BEAKER: Borosilicate tempered
  • YOKE: Aluminum casting with large T-handle and brake area for use with Lightbanks, Speed Rings, Louvers and Lanterns
  • BEAMER HOUSING: Solid one piece machined aluminum with replaceable ears
  • BEAMER REFLECTOR: 7" diameter specular parabolic, aluminum 90 percent reflectance electrolytically coated
  • SCRIM SIZE: 7 3/4"
  • MOUNTING: All standard 5/8" baby
  • LAMP: 800 Watt HMI/SE daylight single ended discharge
  • CONNECTORS: Veam quarter-turn quick locking
  • EXTENSION CABLE: 25 foot shielded. Common to 200/400 and 800 (nine foot cable attached to the head)
    • Electronic, square wave flicker free ballast
    • AC input: 90V to 132V or by sliding selector switch: 180-265V, 50 or 60Hz
    • On/Off push button switch
    • Completely silent (convection cooled)
  • Kit Weight: 42 lbs
  • Kit Dimensions: 17.5" LR x 12" FB x 16.5" TB

Average Customer Rating

There are no ratings for this product, be the first to review!

Customer Reviews

This product has no reviews yet.

Back to Products